uPVC Sliding Doors Sydney

A sliding door is the default answer wherever a door has to open onto a balcony, a courtyard or a deck without stealing the space a swinging leaf would need. Ours are built on European uPVC profiles with steel-reinforced sashes and multi-point locking, running on adjustable rollers sized to the sash weight - which is what stops a heavy double glazed panel from dragging after its first summer.

Every window and door is made to measure, so the figure above is a starting point rather than a quote. Size, glazing specification, colour and access all move it - the pricing guide explains each factor, and a free on-site measure produces an itemised price.

Why the old one is hard to move

Almost every sliding door we replace has the same two faults: rollers that have collapsed under a weight they were never rated for, and a track that has filled with grit because it was never designed to be cleaned. We size the gear to the actual glass weight and use a track profile that sheds debris, and the sashes are adjustable at the roller so the door can be re-levelled years later rather than replaced.

Sealing a large opening

A slider is the largest single hole in most Sydney homes, so its seal matters more than any window in the house. Interlocking meeting stiles, full-perimeter gaskets and multi-point locking that pulls the sash into the frame are what let a door this size hold a thermal and acoustic result close to the fixed glazing around it.

Thresholds and access

Low-profile and flush threshold options are available where level access matters - for ageing in place, wheelchair access, or simply to stop a raised sill interrupting a continuous floor finish out onto a deck. Flag it at the measure, because the threshold detail affects waterproofing and has to be planned rather than added.