Mon-Fri 8am-5pm · Sydney, NSW
Double Glazing

Double Glazed Windows and Doors in Sydney

Made to measure in European uPVC, installed by our own team across Sydney, the Central Coast, Newcastle and Wollongong. From $350 per window, with a 10-year warranty.

10 YearProduct Warranty
45 dBNoise Reduction
30%Energy Bill Savings
0.77W/m²K Frame U-Value

Double glazing is two panes of glass with a sealed, gas-filled cavity between them. That cavity is the whole point: it is a far worse conductor of heat than glass is, and it interrupts the path sound takes through a window. Everything else - the coatings, the frame, the hardware - exists to make the most of it or to stop it being undone.

What double glazing actually fixes

Three problems, in the order Sydney homeowners usually rank them.

Summer heat. A west-facing single glazed window is, in practical terms, a radiator. A double glazed unit with a Low-E coating reflects a large share of solar infrared before it ever enters the room, which is why the difference is most obvious in late afternoon in a room you previously could not use in February.

Noise. The cavity breaks the transmission path, and acoustic laminated glass adds a damping interlayer that absorbs vibration rather than passing it on. Together, in a properly sealing frame, that reaches up to 45dB of reduction. If a main road, a flight path or a rail line is your reason for calling, this is the part of the specification that matters and it is worth spending on.

Winter warmth and condensation. The inner pane sits much closer to room temperature than a single pane does, so it stops shedding heat into the room's air and, just as importantly, stops being the cold surface that water condenses onto every morning. Condensation on the inside of a window is not a window fault - it is the window telling you it is the coldest surface in the room.

Why the frame decides the result

This is the part that gets skipped in most sales conversations. A high-specification insulated glass unit set into a conductive, poorly sealing frame will disappoint you, because heat and noise will simply route around the glass. Standard aluminium conducts heat straight through the metal from outside to inside - a thermal bridge across the wall line that no glazing upgrade can compensate for.

Our frames are five and six chambered European uPVC, welded at the corners, with steel reinforcement where structure demands it and frame U-values as low as 0.77 W/m²K. They are rated for insulated glass units up to 44mm thick, which matters more than it sounds: the acoustic laminated units that do the real work on noise are heavy, and a slimmer frame simply cannot take them. Multi-point European hardware then pulls the sash hard against a continuous gasket, so the seal is genuine rather than nominal. The full uPVC versus aluminium comparison covers this in detail.

Double or triple glazed?

For the overwhelming majority of Sydney homes, double glazing with the right coatings and an acoustic laminated pane where noise is a factor is the correct answer, and the money that would go into a third pane buys more comfort spent on glass specification instead. Triple glazing earns its place in Passive House projects, in the coldest parts of the Blue Mountains and Southern Highlands, and wherever a certification target rather than everyday comfort sets the requirement. We build both - see triple glazed windows for where the line sits.

Window styles

Double glazed windows, by opening style

Every style below is built as a double or triple glazed unit in European uPVC.

Casement Windows

Side-hinged so the sash swings clear of the opening, a casement gives you the whole aperture for airflow and an uninterrupted view when open.

From $580

Tilt and Turn Windows

The signature European window: one handle, two modes. Tilt the sash inward at the top for secure background ventilation, or turn it a further ninety degrees to swing fully open.

From $780

Awning Windows

Top-hinged so the open sash forms a small awning over the opening - which is exactly why they can stay open through a Sydney downpour.

From $520

Sliding Windows

Horizontal operation within the frame, so nothing swings into the room or out over a walkway. The practical choice where space rules out a casement.

Fixed Windows

No sash, no hardware, no gap to seal - which makes a fixed window the best thermal and acoustic performer in the whole range, and the cheapest per square metre.

From $350

Bay Windows

An angled multi-panel configuration that projects beyond the wall line, adding usable floor space and a wide outlook to the room behind it.

Door styles

Double glazed doors, by opening style

Sliding Doors

The practical opening for balconies and courtyards - nothing swings, so the space either side of the door stays usable.

From $1,850

Bi-Fold Doors

Panels fold back on themselves and stack clear of the opening, so the wall between inside and outside effectively disappears.

From $3,200

French Doors

A pair of hinged glazed leaves meeting in the centre - the classic European opening, and the one that suits a period Sydney home best.

From $2,600

Lift and Slide Doors

Turning the handle lifts the entire sash off its seals onto the rollers - so a panel weighing hundreds of kilos moves with one hand.

Tilt and Slide Doors

A sliding door that also tilts - secure background ventilation without leaving a full-height opening standing open.

Stacking Doors

Multiple sliding panels that gather behind one another at one end of the opening, clearing most of the aperture without folding.

Entrance Doors

The front door is usually the weakest thermal element left in a house after the windows are done - and the easiest one to forget.

Double glazing across Sydney

We measure, manufacture and install across the Sydney metropolitan area - the Eastern Suburbs, Inner West, North Shore, Northern Beaches, Sutherland Shire and Western Sydney - as well as the Central Coast, Newcastle and Wollongong. Installation is by our own team rather than subcontractors, which is what lets us stand behind a 6-year workmanship guarantee alongside the 10-year product warranty.

The right specification is not the same in every part of the city. Coastal and harbour-front homes need corrosion resistance and salt-air durability that aluminium struggles with. Homes under a flight path or on an arterial road need the acoustic specification prioritised over the thermal one. Western Sydney needs solar control above everything else, because the problem there is summer heat rather than winter cold. We set the glazing to the address, not to a catalogue. See areas we serve for the full coverage list.

Apartments, units and strata buildings

Replacing windows in a strata scheme is a different exercise to replacing them in a house: the windows are usually common property, the decision belongs to the owners corporation rather than to any one owner, and the work has to be scheduled around residents. We run a dedicated program for this, with itemised proposals formatted for AGM papers, staged delivery across financial years where budgets require it, and committee presentations where they help. See strata window replacement.

Common questions

Double glazing, answered

A double glazed unit is two panes of glass separated by a sealed cavity, usually filled with argon and held apart by a spacer bar around the edge. The cavity is the insulator: heat and sound both cross it far less readily than they cross a single pane. The whole assembly is sealed as one insulated glass unit and set into the frame, so it cannot be retrofitted into a single glazed frame without replacing the frame.
Indicative starting prices are $350 for a 900 x 600mm fixed window, $520 for an awning, $580 for a 900 x 1200mm casement and $780 for a tilt and turn, all double glazed and including GST. Doors start from $1,850 for a sliding door. Size, glazing specification, colour and access move the final figure, and whole-home or whole-building projects attract volume pricing.
Yes, but the size of the improvement depends on the specification rather than simply on there being two panes. Sound reduction comes from glass mass, the cavity width and the quality of the seal around the opening sash. A sealed uPVC frame with acoustic laminated glass, using two different pane thicknesses so both do not resonate at the same frequency, reaches up to 45dB - which is the difference between conversation-level noise and a quiet room.
Not in the true sense. An insulated glass unit is thicker and much heavier than a single pane and needs a frame with the rebate depth and structural capacity to carry it - an old aluminium or timber frame has neither. Retrofit secondary glazing, a second pane added inside the existing window, is a different product with different results. Replacing the frame and the glass together is the only way to get both the thermal and the acoustic benefit.
Customers report reductions of up to 30 percent after replacement. The size of the saving depends on how leaky the original windows were, which way the house faces and how much you heat and cool. Homes with large west-facing glass and old single glazed aluminium frames see the largest change, because that is the worst starting point.
Yes, and the reason is the reverse of the European one. In Sydney the dominant problem is summer heat gain through glass, particularly on western elevations, and a double glazed unit with a Low-E coating rejects a large share of that before it enters the room. Winter warmth and noise reduction come as part of the same package. It is only in genuinely cold climates that the winter case is the primary one.

Further reading: what double glazing costs, how double glazing reduces noise, double versus triple glazed in Sydney, and Passive House certified glazing.

Find out what double glazing would cost for your home

Free on-site measure and an itemised, obligation-free proposal.

Request Your Free Quote